In the TV Menu, under initial setup, you want to select “EZ Setup” to verify the location of the television. Select LOCATION and HOME as the television’s location. If the TV location is set to “Store” and you switch the “A/V Mode” to “On”, the “A/V Mode” will default back to “Off” after 30 minutes. Page 22: Watching Tv EZ Setup Welcome Select where the TV will be placed. The picture will be optimized for that location. Thank You for Your Purchase of our SHARP Liquid Crystal Television. Please press [ENTER] to start the Wizard. Home Store Enter Enter Page 23 Watching TV 7. Completed Home: “Power Saving” is set to "On", and AV MODE I have a 60 inch sharp led with at least 6 usb ports. If the device your using is using a USB connection plug it directly into 1 of your usb ports on the side of the tv. You then need to use your input button on the remote to correspondwith the usb port your using for that device. If you are using usb port 6 keep pushing the input until it gets The sharp universal remote can also be used to control other devices while getting rid of separate remote for multiple devices. Before you start using the universal remote codes for sharp TV to control other devices, you need to follow the programming methods stated below. You can try with the below mentioned sharp tv codes. eeZUPD.